- Features
- KM-K200 INJECTION PREPARATION UNIT
CONTAINER DIMENSIONS
Width 2350 mm
Length 3130 mm
Height 2000 mm
Weight 2200 kg
Opening lid on all surfaces
- Automatic Injection Preparation Unit
- Injection pump
- Mixer/Bakery
- Agitator/Bakery
- Container type compliant with International Transport Regulations
- Ability to Dose and Mix Water, Bentonite, Chemical Additives, Cement and 0.3 mm Sand
- Precise Dosing
- Automatic Control
- User-Friendly Automation/li>
- Reporting and Stock Tracking/li>
- Production reports via Hard Copy or USB Port,
- Ability to obtain stock status reports
- Remote control for troubleshooting
Technical Specifications
| INJECTION PUMP | ||
| Engine | 11 KW | |
| Hydraulic Pressure | 160 bar | |
| Injection Pressure | 0-100 bar | |
| MIXER | ||
| Capacity | 200 lt / dak | |
| Pump Flow Rate | 30 sn | |
| Engine | 7,5 kw / 1.400 Cycle | |
| Loadcell Capacity | 1000 kg | |
| Mixing Speed | 30 sn | |
| Mixture Preparation | Volute System Pump | |
| Transmission Pressure | 4 atm | |
| Lid Safety Sensor | ||
| RELAXING | ||
| Capacity | 400 lt | |
| Engine | 2,2 kW | |
| Lid Safety Sensor | ||
| Relaxing Level Sensor | ||
| AIR COMPRESSOR | ||
| Electric Engine | 2,2 kW | |
| Tank Capacity | 350 lt | |
| Flow | 300 lt/min | |
| MASS PUMP | ||
| Electric Engine | 4 kW | |
| Pump Flow Rate | 1200 lt/min | |
*Container dimensions and manufacturing standards comply with international maritime transport standards. Custom sizes are also available.
AUTOMATION
- Manual or automatic operation
- Recording and display of fault and alarm conditions
- Stock tracking
- Ability to enter 99 prescriptions
- Ability to record filling results and export via USB port
- All technical data is purely for illustrative purposes and is subject to change without prior notice.
